Resource Brochure

11. Laminate bench top installation instructions. 8 Preparing for joins at internal corners. You will need to prepare for bench top connectors so they can be installed and done up. To do this, mark the position of the connectors and cut 50mm diameter oval holes into the top of the corner cabinet. “IE Two 50mm holes side by side joined up”. 9 Applying glue to the bench top join. Apply glue to the bench top join then push the join together. 10 Doing up the bench top connecters. With a 10mm spanner do up the bench top connectors firmly, but not too tightly. 11 Flushing up the join. With a block of wood and a hammer tap the join flush over the top of each connector. When you are satisfied, do the connectors up tightly and clean the residual glue off using a clean rag and water. Tip , you can move the bench top out from walls to enable access to bench top conectors.