Resource Brochure

LOOX OVERVIEW / 95 With what output tolerance should drivers and LED lights be calculated? ±10 percent What binning (colour deviation) do LOOX LED lights have? ±200 Kelvin Can the 12V/24V lights be dimmed at the primary side? (Phase section - phase dimmer) No, this is not possible. With LEDs, dimming takes place at the secondary side. What has a major effect on the service life of drivers and LEDs? An ambient temperature and / or voltage that is too high. How long should the lead of an LED light / LED flexible strip light be? 6 metres, as with a longer lead the resistance drops and the specified light intensity can no longer be guaranteed. Can an LED flexible strip light be used behind acrylic glass? Yes, however the acrylic glass increases the light colour variations (binning) up to four times and minimal colour deviations are therefore more visible. Can the multi switch box, the multi driver box and the 3-way distributor with switching function be connected in series multiple times? No, because the signals can no longer be transmitted properly. Can 12V and 350mA lights be used together? Yes, please use the LOOX converter (refer to page 88). Which ambient variables can lead to problems when using the door sensor switch? High-gloss front panels and sliding doors. Solution: Please use motion detector. Is it possible to control multiple colour mixers with a single remote control? Yes, different colour mixers can be taught in on a single remote control. What is the service life of the drivers? Approx. 30,000 hours at an ambient temperature of 45 °C. Is the dimmer setting saved if the power fails? The dimmer setting is saved for RGB / multi-white mixers. No, the dimmer setting is not saved for the LOOX dimmer. Technical questions about LOOX