Resource Brochure

47 Tips & tricks should be aged/operated for 100 hours. Interruptions during burn- in are allowed. Insuffcient ageing can result in flickering and early blackening which fnally yields to reduced Iife of the lamps. Using IR switches When using IR sensors, such as in combination with the Multiswitch or the integrated sensor of CabLite / Innoline, make sure that the infrared beam is reflected cleanly to the receiver. High gloss but also too strongly frosted surfaces and incorrect mounting distances can lead here to errors. Please use the provid- ed reflective stickers. Blinking LED lights Blinking lights are typical of the over- or under-loading of a ballast. This can be caused by an inappropriate number of lights, excessively long line connections or a partial short-circuit (e.g. clamped line). Malfunctions or different levels of brightness in LED Versa strips. When you connect sections of the Versa Inside strips, you need to ensure that connectors have the exact polarity and are frmly seated. Binning allows for constant product quality. In the industrial production of LED chips, deviations always occur during the manufacturing process. The photometric properties of the chips differ in colour and luminosity. To ensure a constant light quality with the same brightness level and uniform light colour, the LEDs of a batch must be sorted. They are divided into selec- tion classes, called "bins". Important selection criteria for this are chromaticity, luminous flux (unit: Lumens) and colour temperature (unit: Kelvin). This is why the precise specifcation of the light colour of a light series is simply not possible. To ensure availability and appropriate price/performance ratio, LED lights with different production dates can be equipped with different selection classes of a LED. We are committed to infrequent change of selection classes and in many lights types we already offer "single binning" – i.e. fttings with always the same LED selection. Replacing LED light bulbs LED light bulb replacement is not provided. Care and maintenance Please only clean your light in OFF state. The care is limited to surfaces, e.g. plexiglass and covers. Ensure that no moisture enters the terminal boxes or electrical parts. Important information for LED lighting systems LED lighting systems can produce very intense radiation that can possibly damage the eyes if used improperly. Therefore, never look directly into the light from a short distance. Correct disposal of LEDs LED modules and LED lights are mercury free, but contain electron- ic components. They therefore fall within the regulations of the Waste Electrical and Electronic Equipment Act (ElektroG/WEEE). LEDs may therefore not be disposed of in the normal waste. LED lights can be handed in at designated collection points free of charge. 
 Safety instructions for installation: Always follow these instructions and the installation instructions for a safe and secure installation and use of this lamp. Keep the installation manual for future reference. Installation and electrical connections must be carried out by a qualifed person. Always dis- connect the power supply before connecting the circuit and secure it against unintentional reconnection. Make sure there is no volt- age present before starting work. The maximum output in watts indicated on the lamp/operating unit must be taken into account when connecting it to a power circuit or a power supply unit. Un- der no circumstances may the specifed value be exceeded! Lights may be used only for their intended purpose. Interior lighting may not be used outdoors. Lights may not be covered by any objects. Attention! To avoid risks, a damaged outer flexible cable of this light may only be replaced by a qualifed electrician or the manu- facturer.