14. Door and drawer front installation instructions.
1 Attaching the drawer slides to the
cabinet.
Screw the slides to the cabinet using the
screws provided.
Tip, Do this only after bench tops have been
installed and sink & hot plate holes have been
cut out, this will save grit from fouling the
drawer tracks.
2 Preparing drawer fronts for
installation.
Tip, Use the screw driver bit to counter sink
the pilot hole in the back of the drawer fronts,
this will aid in putting the fronts onto the
drawer box.
3 Attaching the drawer fronts to the
drawer box.
With a hand screw driver attach the drawer
fronts using the 30mm screws & drawer front
adjusters provided being careful to ensure
the arrows face to the sides of the drawer.
Adjust the drawers by moving side to side ; up
& down by turning the adjusters. When you
have them adjusted correctly tighten them
firmly.
Caution; for those customers that have
chosen a moulded door with the whole of the
centre that has been routed out do not forget
to use the washers that have been provided
underneath the drawer front adjuster so the
screws do not come thru the drawer fronts.
4 Fixing the drawer fronts to the drawer
boxes.
Using the 30mm screws provided fix the
fronts to the drawer box with four screws .