5. Base cupboard installation instructions.
1 Base carcase placement.
Place all base carcases on prepared kick boxes
& fasten together using G clamps and fix using
the 30mm screws provided. With the sink
carcase you will need to bring the plumbing
thru either the back of the cabinet or the
bottom.
Tip, Do not be overly concerned if you need to
make the holes larger, as there are special
plastic hole covers for around plumbing pipes
available at plumbing shops.
2 Positioning the base cabinets to kick
boxes.
Measure the overhang of the cabinet from the
face of the kick facing , It should be 50mm less
the thickness of the kick facing.
3 Fixing the base cabinets to kick boxes.
Fix the base cabinets down to the kick boxes
using the 50mm screws provided.
Tip, Do not attempt to screw cabinets back to
the wall as this will result in twisting the
cabinets and cause the cabinet fronts not to
line up correctly.
4 Install bench tops.
Fit and install bench tops as in bench top
installation instructions.
Tip, Fit and install bench tops before you
install tall panels and tall cabinets, as this will
make it easier for you.