220 / 1302
9. Wall oven tower installation instructions.
1 Position base cabinet.
Fix base cabinet into position.
2 Install both side panels.
Install both side panels as per side panel
installation instructions.
Tip, Take particular care to ensure that the
two panels are plumb as if there is any twist
to the front edges then you will find it difficult
to install the microwave cabinet.
3 Install the oven base.
Attach the oven base on top of the oven base
cabinet.
4 Preparation of the top cabinet.
Temporally fix some scrap material to the top
of the top cabinet so that they overhang the
sides approximately 16mm +. Make sure that
you can remove these later after it is in
position. If you cannot remove the material
you will need to fix this from inside the
cabinet.
Tip, Position your screws approximately
50mm from the front and 25mm off the back
to the inside of the cabinet this way if you are
using the bulk head frame you can use the
same screw holes later.